Hot

Mar 31, 2026
0 comments
by John White

What Are UV Ink Properties for Industrial Printing?

UV ink properties for industrial printing include instant curing under 250-400nm UV light, viscosity of 15-25 at 32°C, fineness 15-25μm, no VOCs for eco-friendliness, excellent adhesion on PVC/metal/glass, high gloss/abrasion resistance, and stability for high-speed flatbeds up to 154 sqm/hr...

Mar 31, 2026
0 comments
by John White

How to Calibrate UV Flatbed Printer Colors for Perfect Accuracy?

To calibrate UV flatbed printer colors: 1) Calibrate your monitor; 2) Load ICC profile in RIIN Print/Onyx RIP; 3) Print test chart on target substrate; 4) Measure with spectrophotometer for Delta E <2; 5) Adjust curves/density; 6) Verify on rigid...

Mar 31, 2026
0 comments
by John White

How to Optimize ICC Profiles for UV Flatbed Printing Success?

ICC profile optimization for UV flatbed printing involves calibrating RIP software like RIIN Print or Onyx with your printer's RICOH Gen5/Gen6 heads, UV inks, and media to ensure linear ink laydown, minimize color shifts, and achieve consistent results on rigid...

Mar 31, 2026
0 comments
by John White

How to Fix Print Smears on UV Flatbed Printers?

Print smears on UV flatbed printers often result from media shifting due to weak vacuum, uncured ink, or dirty RICOH Gen5/Gen6 heads. Fix by checking 4-zone vacuum zones, running head cleaning cycles, adjusting RIIN Print speeds below 100 sqm/hr initially,...

Mar 31, 2026
0 comments
by John White

How to Test Industrial Thermal Printers for Optimal Performance?

To test an industrial thermal printer, start with a scratch test on paper (dark mark indicates thermal coating), run a printer test page for clarity/darkness, calibrate heat/speed settings via RIP software, and check for fade resistance. For high-volume QA, use...

Mar 31, 2026
0 comments
by John White

How to Run a Test Page on UV Flatbed Printers for Perfect Color & Alignment

A UV flatbed printer test page is a diagnostic print pattern that reveals nozzle clogs, color alignment, white ink density, and media hold-down issues. Run it via your RIP software (RIIN Print or Onyx) or printer control panel monthly. Compare...

Mar 31, 2026
0 comments
by John White

How to Print on Plexiglass & Acrylic with UV Flatbeds?

Achieve crystal-clear transparency and vibrant colors on plexiglass/acrylic using UV flatbed printers like AndresJet AJ2130G/R with 8-color CMYK+White+Varnish inks, 1-100mm thickness support, and speeds up to 35 sqm/hr. Key techniques include direct printing, reverse/backlit for signage, and color-white-color layers for...

Mar 30, 2026
0 comments
by John White

Brother vs. Chinese UV Printers: Which is Better for Small Business?

Professional Chinese UV printers like AndresJet with RICOH Gen5/Gen6 heads outperform Brother-equipped budget models (e.g., 6090 at 5 sqm/hr) for small businesses, offering speeds up to 140 sqm/hr, 2-year warranties, 8-year parts, and versatility for signs, gifts, and panels—at lower...

Mar 30, 2026
0 comments
by John White

What Brother’s Mutoh Acquisition Means for the UV Market in 2026?

Brother completed its ¥35 billion acquisition of Mutoh on March 23, 2026, via tender offer at ¥7,626/share, delisting Mutoh to integrate UV/UV-LED wide-format tech under CS B2027. This boosts Brother’s industrial printing but opens opportunities for alternatives like AndresJet’s AJ3220EX...

Mar 30, 2026
0 comments
by John White

Is Brand Name More Important Than Tech in Print-on-Demand Future?

No—tech trumps brand in POD future: Industrial UV flatbeds with RICOH Gen5/Gen6 heads, 120+ sqm/hr speeds (e.g., AJ2130Ultra at 140.7 m²/h), 30% ink savings, and 8-year spares outperform branded premiums for signage/decor scalability amid 26% CAGR growth to $102.99B by...

Mar 30, 2026
0 comments
by John White

Brother GTX vs AndresJet DTF: Which Wins Real-World Performance?

AndresJet UV flatbeds outperform Brother GTX in real-world performance with speeds up to 154 sqm/hr (versus GTX's 55 shirts/hr), handle media from 1–100mm thickness for plastics and signs, utilize industrial RICOH Gen5/Gen6 print heads, and offer an 8-year parts guarantee—making...

Mar 30, 2026
0 comments
by John White

How to Choose a Printer Supplier: Japan Quality vs China Innovation?

Choose a printer supplier by balancing Japan’s precision (e.g., RICOH Gen5/Gen6 heads for durability) with China’s innovation (speeds up to 154 sqm/hr, cost efficiency). Prioritize hybrids like AndresJet offering 2-year warranties, 8-year spares, CE/RCM/UKCA certifications, free samples, and training for...

Mar 30, 2026
0 comments
by John White

Why Are Chinese Industrial Printers Dominating the 2026 Global Market?

Chinese industrial printers dominate the 2026 global market due to manufacturing scale (41.6% digital printing share), cost innovation (40-60% lower prices), and high-speed UV flatbeds like AndresJet AJ3220EX (154 m²/h with Ricoh Gen5 heads). They offer 100mm rigid media handling...

Mar 30, 2026
0 comments
by John White

How Did Brother Succeed from Sewing Machines to High-Tech Printing?

Brother Industries succeeded from sewing machines to high-tech printing by starting as a 1908 repair shop in Japan, pioneering domestic machines in 1928, diversifying into typewriters (1954) and dot-matrix printers (1971 via Centronics), and expanding globally with laser/inkjet tech—driven by...

Mar 30, 2026
0 comments
by John White

What Are the Top 5 Japanese Printer Brands and Their Manufacturing Secrets?

Five of the best-known Japanese printer brands are Epson, Canon, Brother, Ricoh, and Konica Minolta. Their manufacturing advantages are not one shared "secret." Each has developed a different technical system: Epson emphasizes piezoelectric printheads and precision motion control; Canon integrates...

Mar 30, 2026
0 comments
by John White

Why Switch to DTF Printing in 2026? UV Flatbed Upgrade Guide

2026 is the year to switch to DTF printing for its versatility on diverse fabrics, vibrant durability, cost-effective small runs, fast turnaround, and eco-friendly inks—outpacing DTG. Elevate with AndresJet UV flatbeds like AJ2130Ultra (140 m²/h on plastics/signs) for industrial-scale, no-pre-treatment...

Mar 29, 2026
0 comments
by John White

How Much Do UV vs. Eco-Solvent Inks Cost for Small Format Printers in 2026?

UV ink costs $3–6 per 4'×8' print using bulk systems versus eco-solvent's $4–15 with OEM cartridges, but UV's true advantage lies in 75% faster workflows via instant curing, 30% ink savings with grayscale technology, and zero post-processing labor. For rigid...

Mar 29, 2026
0 comments
by John White

Why 2026 Is the Year of Small Format Personalization?

2026 marks the year of small format personalization due to surging e-commerce demand for unique gifts, medals, and coins, fueled by AI-driven variable data printing and real-time customization. AndresJet's AJ1206 UV flatbed prints up to 2,000 coins/hour on 1200x600mm items...

Mar 29, 2026
0 comments
by John White

What Are the Best Compact UV Printers for Limited Workshops?

The best compact UV printers for limited workshops are AndresJet's AJ1206 (1200×600mm print area, 0.01mm accuracy, up to 2,000 coins/hour) and AJ360i (1160×870×1800mm, 60 items/hour). Both feature RICOH Gen5/6 heads, UV LED curing, 2-year warranty, and 8-year spare parts for...

Mar 29, 2026
0 comments
by John White

How to Avoid the 5 Biggest Mistakes When Buying a Small Format UV Flatbed Printer

The five biggest mistakes when buying a small format UV flatbed printer are: (1) choosing non-industrial print heads over RICOH Gen5/Gen6, (2) ignoring CCD automation for faster changeovers, (3) mismatching media thickness to vacuum zones, (4) underestimating total cost of...

Mar 29, 2026
0 comments
by John White

What Are the Most Profitable Small Format Print Products to Sell in 2026?

The most profitable small format print products for 2026 are acrylic charms, custom medals/coins (up to 2,000/hour with AJ1206 UV flatbed), wooden signs, and metal awards, offering 50-65% margins on rigid substrates via in-house UV printing—far surpassing POD's 20-50% with...

Mar 29, 2026
0 comments
by John White

Desktop vs Industrial Small Format UV Printers: Is Upgrade Worth It?

Upgrading from desktop to industrial small format UV printers like AndresJet AJ1206 (2,000 coins/hr, 0-35mm) or AJ2512G/R (35 sqm/hr, 1-100mm) is worth it for volumes over 5,000 units/day, offering 5x speed, RICOH Gen6 heads, 4-zone vacuum, and 8-year parts support—delivering...

Mar 29, 2026
0 comments
by John White

How to Maintain Small Format UV Flatbed Printers for Maximum Uptime?

Top 7 maintenance tips for small format UV flatbed printers: 1) Clean RICOH Gen5/Gen6 printheads daily with nozzle wetting cycles; 2) Circulate white ink to prevent settling; 3) Maintain 20–30°C and 40–60% humidity; 4) Inspect 4-zone vacuum weekly; 5) Run...

Mar 29, 2026
0 comments
by John White

What Are the 5 Best Small Format UV Printers for Home Businesses in 2026?

The 5 best small format UV printers for home businesses in 2026 are: 1) AndresJet AJ1206 (1200x600mm, 2,000 coins/hr, CCD positioning); 2) AndresJet AJ2512G/R (2500x1200mm, 35 sqm/hr, white ink); 3) AndresJet AJ360i (cylindrical, 60 items/hr); 4) OLOEY XP600 (A4 tabletop);...

Mar 29, 2026
0 comments
by John White

Small Format UV vs. DTF: Which Compact Printer Should You Choose?

Choose small format UV flatbed printers like AndresJet AJ1206 for rigid substrates (medals, coins, plastics up to 35mm thick) needing direct, durable prints at 2,000 items/hour with CCD accuracy. DTF suits textiles via transfers but lacks UV's speed, versatility, and...

Mar 28, 2026
0 comments
by John White

What Is the Best UV Flatbed Printer for Wood Panels in Home Decor?

AndresJet AJ3220EX and AJ2130Ultra UV flatbed printers are top choices for wood panels, offering up to 154 sqm/hr speeds, 3200x2000mm size, 100mm thickness, and 720x1200 DPI with RICOH Gen5/Gen6 heads for realistic grain textures using UV inks and white/varnish options...

Mar 28, 2026
0 comments
by John White

How to UV Print on Metal for Durable Industrial Results?

UV printing on metal uses LED UV-curable inks that cure instantly for superior adhesion, scratch resistance, and weatherproof durability on substrates like aluminum and stainless steel. Key steps include surface cleaning, plasma/flame pre-treatment or priming, then direct printing with flatbed...

Previous 1 … 12 13 14 15 16 … 22 Next