hot
- 0 comments
- by John White
Why Direct-to-Object UV Printing Beats Shrink Sleeve Labels
Direct-to-object UV printing beats shrink sleeve labels by eliminating plastic waste, MOQs, and 4-12 week lead times, offering instant LED UV curing for scratch-proof durability, high speeds up to 154 sqm/hr, and small-batch flexibility on bottles, panels, and cylinders—cutting costs...
- 0 comments
- by John White
How Can You Achieve Perfect Seamless Image Wraps on Bottles With UV Printing?
Seamless bottle wraps require precise 2-point pneumatic calibration, RIIN Print stitching software, and Helix printing mode on industrial UV rotary printers. The AJ360i Digital Cylinder Printer eliminates visible seams through 720×1200 DPI resolution, tool-free fixtures for 10–240mm diameters, and sub-millimeter...
- 0 comments
- by John White
Why Spring Is the Best Time to Service Your UV Flatbed Printer Before Summer Peak Season
Spring is the optimal maintenance window for UV flatbed printers because cooler temperatures (20–25°C) and lower humidity (40–60%) enable precise UV LED lamp testing, ink system flushing, and firmware updates without thermal stress. Servicing before summer heat prevents curing inconsistencies,...
- 0 comments
- by John White
How to Safely Handle and Dispose UV Lamps in UV Flatbed Printers?
Safely handle UV lamps in AndresJet UV flatbed printers by wearing gloves, safety glasses, and UV-protective clothing; power off and cool lamps before replacement; for breakage, ventilate area, collect glass in sealed containers without vacuuming, and dispose as hazardous waste....
- 0 comments
- by John White
How to Clean UV Sleeve on Flatbed Printer to Extend Bulb Life?
To clean a UV quartz sleeve on an industrial flatbed printer like AndresJet AJ2130EX, power off the system, wear gloves, remove the sleeve, wipe with a soft cloth soaked in vinegar to dissolve bio-film and minerals, rinse, inspect for damage,...
- 0 comments
- by John White
Which Lasts Longer: Mercury Vapor or LED UV Curing Lamps?
LED UV curing lamps last 10,000-60,000+ hours, far outlasting mercury vapor lamps' 500-3,000 hours in industrial printing, slashing maintenance by 80-90%, eliminating toxic waste, and cutting energy use by 75-85% for high-speed flatbeds over 100 sqm/hr. Check: How Long Do...
- 0 comments
- by John White
Does Frequent On/Off Switching Shorten UV Lamp Life?
No, frequent on/off switching does not significantly shorten LED UV lamp life in modern industrial flatbed printers like AndresJet's AJ2130Ultra (up to 140 m²/h). Unlike mercury arc lamps, LED UV systems experience minimal ignition stress, enabling on-demand operation for variable...
- 0 comments
- by John White
How to Replace UV LED Lamps in Industrial Flatbed Printers: Step-by-Step Guide
UV LED lamps in industrial flatbed printers typically require annual replacement to maintain peak curing intensity and print quality at speeds exceeding 120 sqm/hr. Unlike residential HVAC systems, industrial printers feature dust-resistant rear UV shields and sealed compartments protecting lamps...
- 0 comments
- by John White
Why Blue Light Fails UV Flatbed Printer Curing: Test UV-C Power?
Blue light (405-470nm) in UV flatbed printers is visible but ineffective for curing; true germicidal UV-C (200-280nm, peak 254nm) polymerizes ink by damaging bonds. Test with UV-C strips under the lamp—if no color change, output is low, causing tacky prints....