Knowledge
- 0 comments
- by John White
What Causes Defects on Corrugated Plastic UV Prints?
Defects in corrugated plastic sign production should be classified before settings are changed. Stop and label affected output, compare it with the last accepted sample, verify material and file identity, map where the defect repeats, then test one controlled variable....
- 0 comments
- by John White
How Should Corrugated Plastic Sign Durability Be Tested?
UV print durability on corrugated plastic signs must be defined by end use rather than one generic pass/fail claim. A B2B factory should identify handling and exposure risks, qualify adhesion first, select only relevant abrasion, cleaner, moisture or light tests,...
- 0 comments
- by John White
How Should Canvas UV Print Durability Be Tested?
UV print durability on canvas and art panels must be defined by end use rather than one generic pass/fail claim. A B2B factory should identify handling and exposure risks, qualify adhesion first, select only relevant abrasion, cleaner, moisture or light...
- 0 comments
- by John White
How Do You Build a Repeatable Metal Panel UV Printing Workflow?
A repeatable metal and aluminum panel printing UV printing workflow moves every order through defined gates: job intake, material qualification, file and color preparation, loading, print and cure, inspection, finishing, packing and traceability. The factory should release work only when...
- 0 comments
- by John White
Which Ink-Layer Order Works on Canvas and Art Panels?
The correct white-ink and varnish structure for canvas and art-panel production depends on substrate color, opacity, texture, viewing direction and the required finish. Industrial production should begin with the simplest candidate—color only, white under color, or a verified varnish build—then...
- 0 comments
- by John White
How Should Stone and Slate Be Prepared for UV Printing?
Reliable UV ink adhesion on stone and slate begins with identifying the actual printable surface, not relying on the product name. An industrial B2B workflow should inspect the material, remove contamination with a compatible method, compare untreated and prepared samples,...
- 0 comments
- by John White
How Do You Build a Repeatable Corrugated Packaging UV Workflow?
A repeatable corrugated packaging printing UV printing workflow moves every order through defined gates: job intake, material qualification, file and color preparation, loading, print and cure, inspection, finishing, packing and traceability. The factory should release work only when the previous...
- 0 comments
- by John White
How Should Leather and Faux Leather Be Prepared for UV Printing?
Reliable UV ink adhesion on leather and faux-leather printing starts with identifying the exact surface or coating, removing contamination without damaging the material, deciding whether pretreatment or primer is required, and validating the result on production stock. A B2B factory...
- 0 comments
- by John White
Which Ink-Layer Order Works on Stone and Slate?
The correct white-ink and varnish structure for stone and slate decoration depends on substrate color, opacity, texture, viewing direction and the required finish. Industrial production should begin with the simplest candidate—color only, white under color, or a verified varnish build—then...