hot
- 0 comments
- by John White
What Are UV Ink Properties for Industrial Printing?
UV ink properties for industrial printing include instant curing under 250-400nm UV light, viscosity of 15-25 at 32°C, fineness 15-25μm, no VOCs for eco-friendliness, excellent adhesion on PVC/metal/glass, high gloss/abrasion resistance, and stability for high-speed flatbeds up to 154 sqm/hr...
- 0 comments
- by John White
How to Calibrate UV Flatbed Printer Colors for Perfect Accuracy?
To calibrate UV flatbed printer colors: 1) Calibrate your monitor; 2) Load ICC profile in RIIN Print/Onyx RIP; 3) Print test chart on target substrate; 4) Measure with spectrophotometer for Delta E <2; 5) Adjust curves/density; 6) Verify on rigid...
- 0 comments
- by John White
How to Optimize ICC Profiles for UV Flatbed Printing Success?
ICC profile optimization for UV flatbed printing involves calibrating RIP software like RIIN Print or Onyx with your printer's RICOH Gen5/Gen6 heads, UV inks, and media to ensure linear ink laydown, minimize color shifts, and achieve consistent results on rigid...
- 0 comments
- by John White
How to Fix Print Smears on UV Flatbed Printers?
Print smears on UV flatbed printers often result from media shifting due to weak vacuum, uncured ink, or dirty RICOH Gen5/Gen6 heads. Fix by checking 4-zone vacuum zones, running head cleaning cycles, adjusting RIIN Print speeds below 100 sqm/hr initially,...
- 0 comments
- by John White
How to Test Industrial Thermal Printers for Optimal Performance?
To test an industrial thermal printer, start with a scratch test on paper (dark mark indicates thermal coating), run a printer test page for clarity/darkness, calibrate heat/speed settings via RIP software, and check for fade resistance. For high-volume QA, use...
- 0 comments
- by John White
How to Run a Test Page on UV Flatbed Printers for Perfect Color & Alignment
A UV flatbed printer test page is a diagnostic print pattern that reveals nozzle clogs, color alignment, white ink density, and media hold-down issues. Run it via your RIP software (RIIN Print or Onyx) or printer control panel monthly. Compare...
- 0 comments
- by John White
How to Print on Plexiglass & Acrylic with UV Flatbeds?
Achieve crystal-clear transparency and vibrant colors on plexiglass/acrylic using UV flatbed printers like AndresJet AJ2130G/R with 8-color CMYK+White+Varnish inks, 1-100mm thickness support, and speeds up to 35 sqm/hr. Key techniques include direct printing, reverse/backlit for signage, and color-white-color layers for...
- 0 comments
- by John White
Brother vs. Chinese UV Printers: Which is Better for Small Business?
Professional Chinese UV printers like AndresJet with RICOH Gen5/Gen6 heads outperform Brother-equipped budget models (e.g., 6090 at 5 sqm/hr) for small businesses, offering speeds up to 140 sqm/hr, 2-year warranties, 8-year parts, and versatility for signs, gifts, and panels—at lower...
- 0 comments
- by John White
What Brother’s Mutoh Acquisition Means for the UV Market in 2026?
Brother completed its ¥35 billion acquisition of Mutoh on March 23, 2026, via tender offer at ¥7,626/share, delisting Mutoh to integrate UV/UV-LED wide-format tech under CS B2027. This boosts Brother’s industrial printing but opens opportunities for alternatives like AndresJet’s AJ3220EX...