Knowledge

Jul 22, 2026
0 comments
by John White

How to Fix PC Adhesion Failure in Automotive Trim?

Polycarbonate automotive interior trim can fail adhesion for predictable reasons: surface contamination, low surface energy, incompatible ink chemistry, under-curing, or stress from humidity and UV cycling. For B2B factories and OEM programs, the right fix is not just a stronger...

Jul 22, 2026
0 comments
by John White

How can a sign shop calculate UV flatbed payback period?

Sign-production companies and B2B print shops can calculate an industrial UV flatbed printer's payback period by turning real shop numbers into a monthly cash‑flow model. That means combining amortization, hourly shop rates, ink and parts consumption, labor, utilities, and overhead,...

Jul 21, 2026
0 comments
by John White

How should industrial print rooms control temperature and humidity for UV printers?

Maintaining a stable, controlled print-room environment (temperature and relative humidity) is critical for industrial UV flatbed and large-format inkjet production lines because it directly affects ink viscosity, electrostatic behaviour, and piezoelectric drop consistency — all key for reliable OEM and...

Jul 21, 2026
0 comments
by John White

How to Weatherproof Outdoor Aluminum Signage?

Outdoor architectural aluminum signage can be made far more durable by combining the right substrate preparation, UV-cured ink system, and a protective clear coat validated through accelerated weathering testing. For B2B factories and OEM programs, the real goal is not...

Jul 21, 2026
0 comments
by John White

How does automatic white ink agitation and recirculation prevent titanium dioxide clogging?

For B2B factories using industrial UV printers and UV flatbed printers, automatic white ink agitation and recirculation systems keep titanium dioxide pigments suspended, reduce nozzle clogging, and stabilize production quality in continuous shifts. These systems control flow inside sub-tanks, ink...

Jul 21, 2026
0 comments
by John White

How should factories set ADA‑compliant braille signage profiles with precision ink stacking?

AndresJet recommends an industrial workflow that enforces ADA / ANSI braille physical dimensions by combining controlled digital ink stacking, validated substrate preparation, and production-line acceptance tests for dot height (0.6–0.9 mm) and tactile durability. This article guides procurement engineers, OEMs,...

Jul 21, 2026
0 comments
by John White

How can you correct multi-printhead misalignment in one-pass UV printing?

B2B factories running one-pass industrial UV printers often see micro-gaps, white “halos,” and registration errors when CMYK and white heads are mechanically misaligned or poorly calibrated. Correcting these issues requires a structured mechanical and software workflow: checking carriage geometry, aligning...

Jul 21, 2026
0 comments
by John White

How can direct-to-container UV printing replace plastic labels on HDPE cosmetics tubes?

For cosmetics OEMs and B2B packaging manufacturers, direct-to-container UV printing onto HDPE tubes can replace separate plastic labels, reduce packaging waste, and unlock design flexibility—if adhesion is engineered correctly. Success depends on surface oxidation (typically corona treatment), UV ink selection,...

Jul 20, 2026
0 comments
by John White

How Does Pre-Flight Software Prevent Blurry Prints?

Automated pre-flight software helps B2B print factories catch low-resolution images, missing fonts, RGB files, and vector boundary issues before production starts. For an industrial UV printer workflow, this means fewer reprints, cleaner commissioning, and more predictable output on flatbed and...

Previous 1 … 17 18 19 20 21 … 202 Next