Knowledge
- 0 comments
- by John White
UV Printing on Wood and MDF: Surface Prep, Coatings and Edge Quality
Two panels ordered from the same supplier in different months can print differently, and the difference is not the printer. MDF density, plywood construction, face veneer, resin content, moisture condition and the coating applied at the mill all change how...
- 0 comments
- by John White
Surface Preparation for Reliable UV Printing on Rigid Promotional Signs
Reliable UV printing on rigid promotional signs starts with substrate identification, contamination control and a documented adhesion test. “Rigid signage” is an application category, not a material specification. PVC, acrylic, polycarbonate, coated metal, corrugated plastic and composite boards can require...
- 0 comments
- by John White
Canvas UV Printing: Coating and Preparation Checks
For B2B UV printing, canvas preparation begins with identifying the printable coating and stabilizing the surface without changing its intended texture. Loose canvas, stretched canvas and rigid art panels require different handling. Inspect incoming material, remove loose contamination by a...
- 0 comments
- by John White
Preparing Corrugated Plastic Signs for UV Printing
Reliable UV printing on corrugated plastic begins with confirming the polymer, printable grade and treated face, then protecting that surface through storage, cleaning and loading. For B2B sign production, qualify the actual sheet lot with the intended ink system. A...
- 0 comments
- by John White
How Should Foam Board Be Prepared for UV Printing?
Prepare foam board for UV printing by identifying its face material first, then using the board supplier’s approved cleaning and handling method. Paper-faced foam board, expanded PVC and other faced foam constructions should not share an automatic solvent-wipe or primer...
- 0 comments
- by John White
Preparing Acoustic Panels for UV Printing
Preparing acoustic panels for UV printing starts with identifying the actual printable face and the panel manufacturer’s permitted treatment. Remove loose contamination without damaging fibers, coatings or perforations, then qualify a representative printed sample. Do not assume that a primer...
- 0 comments
- by John White
How Should Nameplates and Control Panels Be Prepared?
Reliable UV ink adhesion on industrial nameplates and control panels begins with identifying the actual printable surface, not relying on the product name. An industrial B2B workflow should inspect the material, remove contamination with a compatible method, compare untreated and...